Guidelines for Maintaining Your Refrigerator

iStock_000023245169_Small

When it comes to your refrigerator, a little bit of maintenance goes a long way. It is your only appliance that runs around the clock, which makes it even more important to take good care of it. Here are some guidelines for maintaining the various components of your refrigerator.

Maintaining the inside

Cleaning the inside of your refrigerator is essential to prevent bad odors and bacteria growth. Follow this process every month for a clean interior:

  • Remove all food, shelves, and drawers from your refrigerator.

  • Wash the shelves and drawers with soap under warm running water.

  • Using a wet rag and a mild cleaning agent, wipe down the interior walls of the refrigerator. Remove all visible spills, stains, and sticky spots.

  • Dry everything using a clean towel.

  • Replace the shelves and drawers. Restock the fridge with your food, throwing away any expired items in the process.

Maintaining the condenser coils

The condenser coils are an afterthought for most people, but they are an important component of your refrigerator. When these coils are too dirty, there is an increased wear-and-tear on your unit and your energy bills can spike as a result. Keep your coils clean by following these steps every six months:

  • Unplug your refrigerator and slide it away from the wall.

  • Locate the condenser coils. They are on the back wall of most units, but some models may have them behind the bottom front grille.

  • Clean the condenser coils using the brush attachment on your vacuum cleaner. Go over the coils with the vacuum until all visible dust and debris is removed.

  • Plug your refrigerator in and slide it back into place .

Maintaining the gasket

The gasket, also known as the door seal, is responsible for creating an air-tight barrier between the inside of your refrigerator and the rest of your kitchen. It is usually one of the first components of a refrigerator to need replacing, which is why it is important to maintain it by following these steps:

  • Closely examine your gasket every month. Inspect it for loose edges, cracks, and spots with excessive wear. A good way to test the seal strength is by closing your refrigerator door on a dollar bill. If you can easily remove the bill or slide it up and down, the gasket needs to be replaced.

  • Clean the gasket every month using a wet rag and soap. The gasket is notorious for developing mold and mildew.

  • Every two months, apply a thin layer of Vaseline on to the gasket. This will keep it from drying out and cracking.

When residents of New York need their refrigerator repair, they trust the experts at Speedy Subzero. We guarantee one-hour service to Long Island and New York City, and our technicians are fully trained to fix any make or model of refrigerator. Our phone lines are always open, so call us any time at 866-782-9376.

Leave a Reply

Your email address will not be published. Required fields are marked *